Steffy Wood Products Multi-Section Storage - Manual (Page 3)

DIVIDER
SHELF
UPPER DIVIDER
CONNECTING BOLT
SLOTS IN SIDE PANEL
ROUNDED EDGE UP ON
SHELVES AND DIVIDERS
SIDE PANEL
CONNECTING BOLT
5
Attach the remaining side panel to the top, shelf and
bottom panels using the connecting bolts and hex key.
Be sure the top, shelf, bottom and back panels are
completely in the slots in the side panel.
6
Turn the unit over onto the back. Place the shelves
into the slots in the side panels making sure the
rounded edge on each shelf is faacing up.
Slide the upper divider into place making sure each
shelf is in the appropriate slot. Attach the dividers
to the top panel and shelf using the connecting bolts
and hex key.
7
Slide the dividers into the slots in the top and shelf
making sure the rounded edge is facing front.
Go back and check to make sure all bolts are tight.
CHECK ALL BOLTS AND SCREWS
PERIODICALLY TO MAKE SURE
THEY ARE TIGHT!!
WARNING !!
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
Place heaviest items on bottom of cabinet.
Never allow children to climb or hang on doors or shelves.
Use of tip-over restraints may only reduce, but not
eliminate, the risk of tip-over.
8
Furniture tipping restraint hardware is included in with the
hardware package for this unit. Follow the installation
instructions printed on the restraint hardware bag.