Kestrel, 4200 pocket air flow, Tracker 5 table of contents – Kestrel 4200 (HVAC) User Manual

Page 3: Getting started

Advertising
background image

Kestrel

®

4200 Pocket Air Flow

®

Tracker

5

TABLE OF CONTENTS

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SPECIAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MAIN SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
APPLICATION EXAMPLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
MEMORY CAPABILITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DEFAULT SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FREQUENTLY ASKED QUESTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CUSTOMER SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Congratulations on the purchase of your Kestrel 4200 Pocket Air Flow Tracker! The Kestrel 4200 is

our newest and most comprehensive HVAC-specific instrument. It not only measures EVERY major

environmental condition easily, accurately and right in the palm of your hand, but now also automatically

calculates Volume Air Flow (CFM) and Humidity Ratio (grains).
While the Kestrel 4200 is user-friendly and simple to use, reading the instruction manual is recommended in

order to use the Kestrel 4200 to its fullest potential.
NK, manufacturer of Kestrel Pocket Weather Meters, is available to answer questions

and provide support. Contact NK by phone: 610.447.1555, fax: 610.447.1577, email:

[email protected], or web: www.nkhome.com.

GETTING STARTED

Pouch and Lanyards

Wrist and neck lanyards and a small pouch have been provided. To install the lanyard,

feed the thin end of the lanyard around the metal post on the battery door (as shown

in diagram). Feed the thick end of the lanyard through the loop on the thin end. Using

tweezers can help.
Battery Installation

Use only AAA batteries. Install batteries as indicated on the battery door. After installing

the batteries, the Kestrel 4200 will automatically start in the Date and Time Setting mode. (See Date and

Time Setup below.) Custom settings and chart data will be saved during a battery change; only the date/

time and MMA values will be lost.
Turning the Kestrel Meter ON and OFF

To turn the Kestrel Meter ON, press the button. To turn the Kestrel Meter OFF, hold the button for two

seconds. Or, press the button, then press the button with the word OFF highlighted. (Note: your unit

will continue to automatically store data when the power is turned off.) When first turned on, the Kestrel

Meter will display a splash screen displaying the model number, the battery indicator, and the code version.

This battery indicator will indicate the percentage of battery life remaining, which is helpful in preventing

unexpected dead batteries.
Date and Time Setup

The first time that you turn on your Kestrel Meter, as well as after a battery change, you

will need to set the date and time. The Introduction Screen will appear for 3 seconds,

followed by the Date/Time Setup Screen. Press the and buttons to scroll through

the settings. Press the and buttons to scroll through the setting options. After

Advertising