Electrix Framing System - Manual (Page 2)

4. Confirm that Wall Extrusions are level and
fastened securely. (Figure D).
D
3. Mount each adjacent Wall Extrusion end-to-
end by inserting projecting Link Bracket (LB)
into the next Wall Extrusion. (Figure C).
Secure to ALL vertical wall studs.
C
LINK BRACKET
LB
E
SHEETROCK SUPPORT BRACKET
SSB
F
SHEETROCK SUPPORT BRACKET
SSB
5. Mount first and each subsequent Sheetrock
Support Bracket (
SSB) by hooking into Wall
Extrusion and over Existing Threaded Stud at
24” intervals. (Figure E).
6. Make sure the TWO SSB rails lock in the
Wall Extrusion support rails. Secure each
SSB with locknut fasteners provided.
(Figure F). 3/8” hexhead tool required.
2