Hot Max Torches PL-40 - Manual (Page 18)

KDAR Company
Warranty
16
KDAR Company, and its affiliates, warrants that
all plasma cutters covered under this warranty is
free from defects in material and workmanship
for one year from the date of purchase. KDAR
also warrants that the gun and hose assembly and
ground clamp assembly is free from defects in
material and workmanship for 90 days from the
date of purchase. This warranty is extended to the
original purchaser who uses the product in a con-
sumer application (personal, residential or house-
hold usage). All plasma cutters covered under this
limited warranty which are used in commercial
applications (i.e. income producing) are warrant-
ed to be free from defects in material and work-
manship for 90 days from the date of original pur-
chase. The products covered under this warranty
are the PL-25 and PL-40.
KDAR Company, and its affiliates, will repair or
replace, at KDAR’s sole discretion, parts found to
be defective in material or workmanship within
the warranty period. Warranty service will be
scheduled according to the normal work flow and
business hours of the service center doing the
work as well as the availability of replacement
parts. All decisions from KDAR Company re-
garding this limited warranty shall be final.
Original Purchaser’s Responsibility:
1. Retain the original cash register receipt as
proof of purchase.
2. Follow manual instructions regarding the care
and operation of your plasma cutter.
3. If warranty work is required, DO NOT RE-
TURN THIS PLASMA CUTTER TO THE
RETAILER. Contact KDAR Company for
instructions. Visit www.hotmaxtorches.com
or call KDAR Company M-F 8AM-5PM CST
to locate the nearest Authorized Service Cen-
ter.
Not Covered:
1. Transportation charges for sending or deliver-
ing the plasma cutter to the Authorized Service
Center or returning the repaired or replacement
plasma cutter back to the customer. These
charges are the responsibility of the customer.
2. Damages caused by ordinary wear, abuse, rain,
freeze damage, negligence, accident or failure
to operate or maintain the plasma cutter in ac-
cordance with the instructions in the operator’s
manual supplied with the equipment.
3. Damage caused by unauthorized repair or al-
terations.
Exclusions and Limitations:
KDAR Company makes no other warranty of
any kind, express or implied. Implied warran-
ties, including warranties of merchantability
and of fitness for a particular purpose, are
hereby disclaimed. The warranty service de-
scribed above is the exclusive remedy under
this warranty; liability for incidental and conse-
quential damages is excluded to the extent per-
mitted by law.
This warranty gives you specific legal rights, and
you may have other rights which vary from state to
state. Some states do not allow a disclaimer of im-
plied warranties, or the exclusion of incidental and
consequential damages, so the above disclaimers
and exclusions may not apply to you.
For warranty service or to obtain service parts
or accessories:
Call: (314) 692-8555 M-F 8-5 PM, CST
Visit: www.hotmaxtorches.com
Write: KDAR Company
1 Mulch Lane
St. Louis, MO 63044