ADS Technologies IntraOral Camera AdvanceCAM - Manual (Page 4)

Advance Cam
Press “Freeze button” to freeze image. Press “Freeze
button” again to copy image into memory. There is also an
additional button on the wand that will allow you to change
from “full” to “quad”. Press this button once and it will put
you in “quad” mode. Press a second time and the camera
will go back to a “full” screen mode. While in “quad” mode
you must depress the capture button only four times to freeze
all images if you press the button a fifth time the image will
be copied into memory.
Transmitter:AIC900
The transmitter has a power indicator that will
show low medium and high power. The
transmitter also has a channel selector that will
select from channels 1 to 4. The power switch is
located on the right side of the unit if looking from
the front as shown
Freeze Button: Press
button to freeze image on
monitor.
Full / Quad Button: Choose
to capture image in full
screen or
capture 4 images
(quad).
Wireless Channel
display Power Indicator
Shows green for
high power and red
for low power.
Power Switch On
and Off. DC Power input
used to charge the
battery
Channel Selector
Plug this end into
the camera.