ADS Technologies IntraOral Camera AdvanceCAM - Manual (Page 8)

Notes: Cameras that start with PA or NT, you will need to
press the freeze button to activate the camera’s LED’s.
This will turn the camera on. Then you will be able to see
an image from the camera.
Docking Station Settings:
AIC800,805,810,815
• Switches 1-4 are to select the docking station’s
channels. Only one can be set to the on position.
They must correspond to the transmitter’s setting.
• The P and N are to select which system is being
used. P is for PAL and N is for NTSC. This must
match the camera SN. Look on the back of the
camera to see if you SN# starts with a P or an N.
Then determine which setting will work for your
configuration.
• The W-L and W are to set the docking station to
wireless or corded mode. W-L is for wireless and
W is for corded.