Audiovox Flasher V7 - Manual (Page 42)

C
H
4
79
SETTINGS
C
H
4
78
SETTINGS
Automatically answers a call after a preset time. An ideal setting for
the hands-free car kit.
1
2 Select one of the following:
3 To save, press [OK].
Off, 5 Secs, 10 Secs, 18 Secs. l
• This function will not be active when you select Vibrate, Silent,
Silencer, or Ringtone after Vibrate as the ringtone mode.
• While head set is connected, Auto Answer works without being
concerned about Clahshell Open/Close or Riner Mode.
• If head set is not connected or the clamshell is on, Auto Answer
doesn't work without being concerned about the ringer mode set.
• When the head set is not connected, Auto Answer works while
clamshell is open except for the Ringtone off.
1
Automatically redials a call up to 5 times after a set time interval.
Available where the signal is weak.
2
3
Under Retry Time, select a time interval option
(Off, 3 Secs, 5 Secs, 7 Secs, 10 Secs). The Repeat
Category will appear when a time frame is chosen.
Under Repeat, select a time interval option
(1 Time, 3 Times, 5 Times).
4 To save, press [OK].
AUTO RETRY
AUTO ANSWER
Press [MENU] .
Press [MENU] .
3 To save, press [OK].
To determine whether or not the network system can detect your
position:
1
2 Select “Location On” or “911 Only”.
LOCATION
Location On: Your location is now available to the network.
911 Only: Your location will be hidden from network
& application except 911.
l
l
Press [MENU] .
1 Press [MENU] .
2 Read the message, then press .
3 Select either “Enable TTY” or “Disable TTY”.
TTY MODE
A TTY (also known as a TDD or Text Telephone), is a
telecommunications device that allows people who are deaf or hard
of hearing, or who have speech or language disabilities, to
communicate via a telephone.
Your phone is compatible with select TTY devices. Your phone and
TTY device will connect via a special cable that plugs into your
phone's headset jack. If this cable was not provided with your TTY
device, contact your TTY device manufacturer to purchase the
connector cable.
4 To save, press [OK].
Enabling TTY may impair headset use and non-TTY accessory
performance.