Siemens HF12M240 - Manual (Page 30)

30
Installation and connection
This appliance is only intended for domestic use.
Place the tabletop appliance on a firm, level surface
(at least 85 cm above the floor). The ventilation slots
on the left side, rear side and the underside must not
be obstructed.
The appliance is fitted with a plug and must only be
connected to a properly installed earthed socket. The
fuse protection must be rated at 10 amperes
(automatic circuit breaker with trigger characteristic
L or B). The mains voltage must correspond with the
voltage specified on the rating plate.
The socket must only be installed and the connecting
cable must only be replaced by a qualified electrician.
The appliance plug must always be within reach.
Adapters, multiway strips and extension leads must
not be used. Overload can lead to a fire hazard.