Kenwood K-531-SB - Manual (Page 9)

9 English
Microcomputer malfunctions: z If the System is connected correctly and still does not operate
normally or shows display errors, reset the microcomputer. (P.45)
Refer also to the instruction manual that comes with the component connected to the System.
z
AUDIO IN terminal: z When you are not using the component, unplug the mini-plug cable from the
main unit.
DIGITAL IN (optical) terminal:
z Select “PCM” for output signal setting of the connected component.
DIGITAL OUT (optical) terminal: z The audio signals from an Audio CD or a CD-R/CD-RW recorded
with CD-DA format are output as digital signals. The audio signals from audio files (MP3/WMA)
recorded on a CD-R/-CD-RW, or “iPod”, “USB”, “BLUETOOTH”, “TUNER”, “AUDIO IN”, “AUX” or “D-IN”
cannot be output.
AUX REC OUT terminals:
z The audio signals from the souce played are output as analog signals.
Other connections (commercially available accessories)
Connection
Ensure that all the cords are securely connected. Loose or incomplete connections may result in noise
interference or no sound at all.
3.5 mm stereo mini-plug cable
(commercially available)
Audio cord
(commercially available)
To SUB WOOFER
PRE OUT
To AUX REC OUT To DIGITAL OUT
To DIGITAL IN To AUX PLAY IN To AUDIO IN
Audio cord
(commercially
available)
Audio cord
(commercially
available) Digital optical cable
(commercially
available)
Digital optical cable
(commercially
available)
Subwoofer with
built-in amplifier
Analog audio input
Digital audio player,
etc.
Output from the
headphones
Cassette deck, etc.
Analog audio input
Analog audio output
Optical digital input
(PCM signal)
Optical digital output
(PCM signal)
Cassette deck, etc.
Digital audio
component
TV or BD recorder, etc.
Rear view
K-531[E_X].indb 9 K-531[E_X].indb 9 12.8.1 11:40:05 AM 12.8.1 11:40:05 AM