Tuner setup, Dab setup, Tuner setup dab setup – Kenwood DNX521VBT User Manual
Page 28
54
54
55
DAB Setup
You can set DAB related parameters.
1
Touch [
] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [DAB SETUP] in the list.
DAB SETUP screen appears.
5
Set each item as follows.
Priority
If the same service is provided by DAB during
Radio Data System reception, automatically
switches to DAB. If the same service is provided
by Radio Data System when reception of the
service being provided by DAB becomes poor,
automatically switches to Radio Data System.
PTY Watch
If the service of the set program type begins
with the ensemble being received, switches
from any source to DAB for service reception.
Announcement Select
Switches to the set Announcement service. For
details, see
.
Dynamic Range Control
Adjusts the dynamic range of sound.
(Ineffective if the program being received does
not support Dynamic Range Control.)
Default is “OFF”.
Antenna Power*
Sets power supply to the DAB antenna. Set to
“ON” when the DAB antenna in use is equipped
with a booster.
Default is “ON”.
L-Band Tuning*
Sets L-band reception. When set to “ON”, also
receives L-band ensembles.
* This item can be set when in STANDBY
source.
Tuner Setup
You can set tuner related parameters.
1
Touch [
] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [TUNER SETUP] in the list.
TUNER SETUP screen appears.
5
Set each item as follows.
NEWS
Sets a news bulletin interrupt time. Default is
“OFF”.
AF
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is “ON”.
Regional
Sets whether to switch to the station only
in the specific region using the “AF” control.
Default is “ON”.
Auto TP Seek
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is “ON”.
Language Select
Selects a display language for the PTY function.