Kenwood DNX521VBT - Manual (Page 5)

88 9
Return to the Top page
Basic Operations
Return to the Top page
Basic Operations
DNX4210DAB
1 7 9 8
2
3
4
5
6
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX4210DAB :
If above icons are showed, read the article applicable to the unit you use.
Number Name Motion
1
fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (P.95) .
• If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (P.74) .
2 MENU • Displays the Top Menu screen (P.16) .
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
3 NAV • Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
4 TEL • Displays the Hands Free screen (P.58) .
• Pressing for 1 second turns off the display.
5 Volume Knob • Pressing switches attenuation of the volume on/off.
• Turning adjusts volume up or down.
• Pressing for 1 second displays Tone Control screen
(P.85) .*
6
SCRN • Displays the Screen Control screen.
• Pressing for 1 second displays rear view camera display.
7 Remote
Sensor Receives the remote control signal.
8
0 (Eject) • Ejects the disc.
• Pressing for 1 second ejects the disc forcibly.
9 Disc insert
slot A slot to insert a disc media.
* The display may not switch to the Tone Control screen in some conditions.