Installation page 2-8 – Asante Technologies FS4008E/FS4016E User Manual
Page 18
Installation
Page 2-8
Rack Mounting the FS4008E or FS4016E
The FS4008E and FS4016E come with a rack-mounting kit.
▲
Important! The FS4002E and FS4004E cannot be
installed in an equipment rack.
The FS4008E or FS4016E can be mounted in a standard 19-inch equipment
rack. This rack can be placed in a wiring closet with other equipment.
To install the Switch in an equipment rack:
1
Attach the two mounting brackets (supplied) on each side
of the chassis. See Figure 2-10.
Figure 2-10 Attaching mounting brackets to the FS4008E
2
Mount the Switch in the equipment rack by screwing the
mounting brackets to the equipment rack. See Figure 2-11.
Figure 2-11 Mounting the FS4008E in an equipment rack
The rack mounting is complete. The Switch is ready for
network connections.
Rack-mount bracket
FS4008E
FriendlyNet
8-port 10/100 Fast Ethernet Switch
Uplink
or
Power
Switched 10/100Mbps P
orts
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
FS4008E
FriendlyNet
8-port 10/100 Fast Ethernet Switch
Uplink
or
Power
Switched 10/100Mbps P
orts
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
,