Connecting network devices, Connecting a pc to the switch, Straight-through network cable – Asante Technologies FS4008E/FS4016E User Manual
Page 19: Connecting network devices page 2-9, Figure 2-12 connecting a pc to the switch
Connecting Network Devices
Page 2-9
Connecting Network Devices
Before you connect network devices to the Switch, review the following
guidelines:
❑
Make sure the network cable length is less than 100 meters (Category
5 and up)
◆
Note: Category 3 is acceptable for 10Base-T
❑
Use a straight-through twisted pair cable or a crossover cable when
appropriate for either uplink or standard data ports
❑
When connecting two switches together (cascading switches), make
sure that the link between them is no longer than 100 meters
❑
Network cable segments can be connected to, or disconnected from,
the Switch while the Switch’s power is on
Connecting a PC to the Switch
❑
Use a four-pair Category 5 UTP straight-through cable with RJ-45
connectors
❑
Connect the PC to any of the Switch’s ports. See Figure 2-12
Figure 2-12 Connecting a PC to the Switch
FS4008E
FriendlyNet
8-port 10/100 Fast Ethernet Switch
Uplink
or
Power
Switched 10/100Mbps Ports
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Straight-through network cable