Kenwood DNX9260BT - Manual (Page 37)

DDX series DDX8026BT English 37
Next page 3
Radio Listening
Source Control Screen Source Control Screen
Switches to the source control screen to
use various functions.
1 Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 18).
2 Operation on the Source Control
screen
1 1 1
2 2 2
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[TI] Turns the Traffic Information
function On or Off.
See <Traffic Information> (page 40).
[ 4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
2 Display the Tuner Preset List Screen.
See <Preset Select> (page 38).
1 Information display
FM FM Selects the Program Service
Name, Title & Artist name, Station
name, Radio Text plus, or Radio Text.
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[ ] When appears, the text display
is scrolled by touching it.
Various control screens appear in the Tuner Source mode.
• Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller
mode switch> (page 96).
Multi Function
[1/3] Switches the multi function
display.
[ ] Closes the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons
appear, you can recall the stations on
memory.
For memory of broadcasting stations,
see <Auto Memory> (page 38) or
<Manual Memory> (page 39).
[SEEK] Switches the Seek mode.
The mode is switched in the following
order each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception
automatically.
"AUTO2" Tunes in stations in memory one after
another.
"MANU" Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 38).
[PTY] FM FM Searches station by
program type. See <Search by Program
Type> (page 40).
[MONO] FM FM Select the Monaural
reception.
B64-4676-00_01_E_English.indd 37 B64-4676-00_01_E_English.indd 37 10/02/05 15:27 10/02/05 15:27