Kenwood DPX504U - Manual (Page 4)

4 | Quick Start Guide
First step
Canceling the Demonstration
Mode
Cancel the demonstration mode
when you use it for the first time after
installation.
1
Press the [VOL] knob to cancel the
demonstration mode when the
messages “To cancel DEMO press the
volume knob”/ “CANCEL DEMO PRESS
VOLUME KNOB” are displayed (approx.
15 seconds).
2
Turn the [VOL] knob to select “YES”, and
then press the [VOL] knob.
The demonstration mode can also be
canceled in the Function setting mode.
Refer to <Demonstration mode Setting>
(page 45) of Instruction manual.
DPX504U
Adjusting the Date
1
Press the [VOL] knob to enter the
Function setting mode.
2
The item can be selected and
determined as follows.
”Settings”
➜ “Clock & Date” ➜ “Date
Adjust”
To select the item, turn the [VOL] knob.
To determine the item, press the [VOL]
knob.
3
Press [ 4] or [¢] button to select
month, date, or year to set.
4
Turn the [VOL] knob to adjust the year,
month, and date.
5
Press the [VOL] knob to finish the date
adjusting.
6
Turn the [VOL] knob to select “Date
Mode”, and then press the [VOL] knob.
7
Turn the [VOL] knob to select Date
format, and then press the [VOL] knob.
8
Press the [ ] knob for at least 1
second, and then press it again briefly to
exit the Function setting mode.
[VOL]
[ 4]/[¢]
[ ]
B59-2055-00_00_2DIN_E_QSG.indb 4 11/01/19 15:00