Alpine CDA-7990 - Manual (Page 20)

18
- EN
Basic Operation
CD Text Scroll Setting
This CD player has the ability to scroll the disc and track name
recorded on CD-Text discs. The scrolling feature will work with
names greater than 12 characters. This feature will not work for
the 12 character titles that were input manually.
1
Press and hold the SETUP button for at least 3
seconds.
2 Press the UP button repeatedly to select
“SCROLL”.
Each press of the
UP button changes the
modes as shown:
3 Press the TUNE button to toggle mode between
SCROLL ON and OFF.
• SCROLL ON: the display of CD text is scrolled
continuously.
• SCROLL OFF: the display is scrolled only when
a disc is loaded or when a track is changed and
the text information exceeds 12 digits.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
BASS/TRE REM CONT TUNER ILLUMI
SCROLL SUB-W D-OUT AUX-IN MUTE
• If you press the DN button
the display scrolls in reverse
sequence.
• Initial mode is “SCROLL OFF”.
• The unit scrolls only CD text names.
But, when the MD player is
connected, the unit also scrolls MD
titles. The disc titles input manually
(refer to pages 26, 27) cannot be
scrolled.
SETUP
MODE(Audio Control)
DN
TUNE
UP