Alpine CDA-7990 - Manual (Page 23)

21
- EN
Setting the AUX Mode
You can input TV/video sound by connecting an optional Ai-
NET/RCA Interface cable (KCA-121B) to this component.
1 Press and hold the SETUP button for more than 3
seconds.
2
Press the UP button repeatedly to select
“AUX-IN” .
Each press of the
UP button changes the
modes as shown:
3 Press the TUNE button to set the mode to
AUX-IN ON.
4
Once AUX-IN is ON, AUXILIARY is displayed by
pressing the
UP or DN button.
5
Press the TUNE button to select the desired
display setting in AUX-IN mode.
6
Press the SETUP button to activate the normal
mode.
7 To adjust the volume, etc., first press the
SOURCE button and select the AUXILIARY
mode, then make the necessary adjustment.
BASS/TRE REM CONT TUNER ILLUMI
SCROLL SUB-W D-OUT AUX-IN MUTE
• If you press the DN button
the display scrolls in reverse
sequence.
AUX-IN OFF AUX-IN ON
• The initial setting at the factory
is AUX-IN OFF.
TUNER CD AUXILIARY
AUX-IN MUTE AUXILIARY
A U X I L I A R Y
<Display when setting to “AUXILIARY”>
AUXILIARY VCR GAME TELEVISION