Phottix Strato TTL for Nikon - Manual (Page 14)

14
specific settings for remote use.
5. Using the Phottix Strato TTL transmitter
will allow for remote wireless shutter release
functions. The Strato TTL shutter button
functions the same as a camera shutter
button: A half-press of the shutter button will
autofocus, a full press will take a photo.
Please Note:
When using the transmitter as a wireless
shutter release, pressing the shutter button
on the transmitter will only trigger cameras
connected to receivers on the same channel.
It will not fire the flashes connected to the
receivers on the same channel.
*On compatible cameras
Using the Strato TTL as a wired
shutter release*
1. Turn off the camera and the Strato TTL
receiver.
2. Attach the correct Phottix Accessory Cable
for your camera make and model to the 2.5
mm Accessory Port on the Strato TTL receiver
3. Attach the other end of the cable to the
camera’s remote port.
4. Turn on the camera and Strato T TL
receiver**.
5. Consult your camera manual for specific
settings for remote use.
6. The Strato TTL receiver will function as a
wired shutter release. The shutter button