Phottix Strato - Manual (Page 7)

7
14. Using the Strato as a wired shutter
release*
Turn off the camera and the Phottix Strato re-
ceiver. Attach the correct Phottix Accessory Ca-
ble for your camera make and model to the 2.5
mm Accessory Port on the Strato receiver
Attach the other end of the cable to the cam-
era’s remote port. Turn on the camera and
Phottix Strato receiver**. Consult your camera
manual for specific settings for remote use. The
Phottix Strato receiver will function as a wired
shutter release functions. The test/shutter but-
ton functions the same as a camera shutter but-
ton: A half-press of the test/shutter button will
autofocus, a full press will take a photo.
*On compatible cameras
**Wired Shutter Release function can be used with-
out turning on the Strato receiver, and will function
without batteries in the receiver.
15. Warnings
This product is a precise electronic instrument.
Do not expose to damp environments or dust.
Do not drop or crush.
Do not use harsh chemical(s) or solvents to
clean the body. Use a soft cloth or lens paper.
Interference: The Phottix Strato transmits and
receives radio signals at 2.4 GHz. Its perform-
ance can be affected by electrical current,
magnetic fields, radio signals, wireless routers,
cellular phones, and other electronic devices.
Environmental objects, such as large buildings
or walls, trees, fences, or cars can also affect per-
formance. If your Strato receiver will not trigger
move its location slightly.
En INSTRUCTION MANUAL