Aiwa CDC-MP3 YU - Manual (Page 12)

tousi-E-12
CD PLAY
11
ENGLISH
Intro play
Press INT during CD play.
The “SCAN” indication flashes, and the first 10
seconds of all the tracks on the CD are played in
order.
When the desired track is found, press INT again.
The unit returns to normal CD play.
Repeat play
Press REP1 during CD play.
The “REPEAT 1” indication lights up, and the
currently selected track is played repeatedly.
Press REP1 again to cancel Repeat play.
Note
If Repeat play is not activated, all the tracks on
the CD are played repeatedly.
Random play
Press RANDOM during CD play.
The “RANDOM” indication lights up, and the
tracks on the CD are played in random order.
Press RANDOM again to cancel Random play.
Note
During Random play, even if r is pressed
repeatedly, it won’t take you back to previous
tracks, only to the beginning of the current track.
MP3 PLAY
You can play MP3 files* written on CD-ROMs,
CD-Rs, or CD-RWs by following the procedure
below.
* An MP3 file stores audio data compressed
using MPEG1, the audio layer-3 file-coding
scheme. We call files that have the “.mp3”
extension “ MP3 files.”
1
Press OPEN to open the front panel,
then insert a CD-ROM, CD-R, or CD-RW
with the labeled side upward.
The unit starts scanning the disc.
2
Close the front panel.
During scanning of the disc, “NOW READING”
scrolls across the display.
The CD-ROM indicator lights up.
Notes
• It may take 2 minutes or more to scan a disc,
depending on the complexity of the folder
tree. If scanning does not finish within 2
minutes, “CANCEL TO EJECT KEY”
appears on the display. If you leave the unit
as it is, it will start scanning again.
• If there are no tracks (MP3 files) on the disc,
“NO MP3” appears.
After scanning, the total number of albums
and tracks appear on the display, then the
unit automatically starts playing the disc from
the first track of the first album.
The total number
of Albums The total number
of Tracks
continued
CD-ROM indicator
01_CDCMP3(YU)E 00.11.22, 11:40 AM 12