Burr King M15 CombiPak - Manual (Page 10)

See our catalog at www.burrking.com Contact us at [email protected]
m15 VIBRATORY opinst.doc - 9/14/2010
7
Occupational Noise Exposure
Burr King vibratory bowls produce levels of noise consistent with their intended
purposes. The level and spectral content of noise produced is dependent on the bowl
size, the degree that the bowl is maintained in proper operating condition, the
abrasive/media and accessories used, the specific application, use or not of the supplied
lid, and the surrounding environment. Noise levels produced by various Burr King
vibratory bowls, as measured at the Burr King factory, range from 76 to 88 decibels. Product
operators and persons in the immediate product vicinity should be protected from excessive noise does
levels as prescribed in OSHA regulation 29, part 1910.95 titled “Occupational Noise Exposure”.
Warranty
Burr King Manufacturing warrants the M15 against defects in material and/or workmanship for a period of
one year after original customer purchase. This warranty is in lieu of all other warranties, either expressed or
implied. Customer induced damage, miss-application, and/or abuse is not covered by warranty. To receive
warranty service you must provide the serial number of your bowl, and its original date of purchase, then
request a return authorization from Burr King Manufacturing, or an authorized distributor. All material, for
which warranty service or replacement is requested must be returned, freight prepaid to the factory for
evaluation. Burr King will (at its sole discretion) repair or replace items that qualify under this warranty. In
the event warranty coverage is extended by Burr King the warranty service will be performed without charge
(including return surface freight charges) to locations within the contiguous United States. For all other
destinations, or for other freight modes, warranty terms are FOB Warsaw, MO USA.