Microlab MD 122 - Manual (Page 3)

Back view
Illustrations
Front View
Front
1. Speaker driver
2. Power LED view
Back view
1. Bass reflex
2. Power button
3. Power DC input
4. Audio input
5. Audio output: to left speaker
6. Volume -
7. Volume +
15. Attachments - Do not use attachments not recommended by the product manufactures, as they
may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must
remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
EN
3
Introduction
1. Mini digital speakers for all portable media playbacks such as computer, Mp3/Mp4, and iPod. Designed
with Microlab experiences on speaker design, small enclosure with excellent sound performances.
2. 2" pure aluminum cones with full range capabilities and bass depth
3. Ideal for travelling and highly portable and easily powered.
Features
1. Basic mini speakers for most digital applications and entertainment
2. 2" pure aluminum cones for full range acoustic production
3. Built-in BTL stereo power amplifier for powered acoustic
4. Dual power supply modes: DC and USB
5. Light weight and compact design
Packing list
You should find following items while unpacking:
Product connection and operation
Connections
1. Connect the audio input cable (3.5mm stereo, green) plug from the right speake to the audio output
socket on the PC or any media player.
2. Connect the stereo speaker cable (3.5mm stereo, black) from the right speaker to the left speaker.
3. Connect the USB plug of the power cable to the USB interface on your PC or any powered USB hub.
4. Turn on the USB power.
Operation
1. Turn on the system by depressing the power button at the rear of the right speaker. The front power
LED will illuminate.
2. Ensure the volume level is set to lowest first.
3. Start the playback device and song.
4. Slowly adjust the volume to your preferred volume level and enjoy. Depress either the volume + or
volume - buttons at the back of the right speaker.
Note: it is advisable not to turn the volume too loud or to its extreme volume limit to avoid damage to
the speaker driver material. Always adjust in slow increment.
EN
4
Mp3\Mp4
Media player
CD\VCD\DVD
TV PC
or Notebook
To any media player with 3.5mm stereo jack
PC or Notebook
Speaker to speaker connection
Audio input DC power input from USB port
Right Left
USB Hub
(Powered)
Right Left Left Right
1
2
3
4
5
6
7
1
2
MD122 speakers 2pcs
USB-to-DC 1pc
3.5mm to 3.5mm 2pcs
User manual 1pc