AMICA OSC 5458 I EN - Manual (Page 3)

Dear customer,
You are now a user of the newest generation of cooker hood, type "OSC 6468 W, OSC
5468 W, OSC 6458 I, OSC 5458 I".
This hood has been specially designed with your expectations in mind, and will undoubtedly
form part of a kitchen fitted in the most modern style. Its high functional and aesthetic
standards are ensured by our modern manufacturing techniques and use of state-of-the-art
technology.
Before commencing installation, please read through the following instructions carefully
to prevent incorrect mounting or use of this hood.
We wish you every satisfaction from your
choice of our company’s cooker hood.
ATTENTION: The manufacturer takes no responsibility for any damage arising from installation or use
inconsistent with the operating instructions.
The function of the OSC 6468 W, OSC 5468 W, OSC 6458 I, OSC 5458 I is to extract or
neutralise kitchen fumes, and it is designed to be permanently mounted over a gas or electric
cooker. To operate in fume extraction mode, it requires an off-take pipe to be fitted to
transport the fumes outside. This pipe (ø 120 mm) should be no longer than 4-5 m. After
installing an active carbon filter, the hood can operate as an odour absorber. In this case, no
off-take pipe leading outside is required.
The cooker hood is an electrical device with a class 2 fire protection rating fitted with a fixed
power lead and plug. It also has its own independent lighting system and exhaust fan with a
choice of three possible rotation speed settings.
Supply voltage AC 230V ~50 Hz
Ventilator motor 1
Lighting 40 W
Number of grease filters 1
Speed levels 3
Breadth (cm) 50, 60
Depth (cm) 50
Height (cm) 13
IO 00150 /2
I Technical description
II Specification
3