AMICA 1143.4TfYDX EN - Manual (Page 25)

25
OPERATION
Touch to start the programme.
You can modify temperature settings for
chamber oven and meat probe at any time,
however, making any changes will modify the
preset program. Modifying one of the preset
temperatures or stops flashing) chang-
es the programme into fan cooking and pork
symbol in the upper left corner of the display
changes to fan cooking symbol. Touch . to
stop the programme at any time. After this, the
appliance switches to standby mode.
Once the food reaches the set temperature,
all functions except cooling fan are turned
off (see: Cooling fan operation) and an
acoustic signal is sounded (4 beeps / pause
/ 4 beeps).
The sequence is repeated every 3 seconds
for about 5 minutes. The display shows the
temperature set for the oven chamber and for
the meat probe and symbol is flashing.
Touch to acknowledge and mute the
acoustic signal. After this, the appliance
switches to standby mode.
Example: using a preset program with no
oven preheating
Select poultry menu and confirm by touching
, The following types of poultry are avail-
able: chicken, duck, goose, turkey.
Select chicken and a confirm selection by
touching . The following screen is displayed
showing the default temperature of 190°C
and weight symbol in box 2.
Flashing weight symbol (scales), indicates
that you can change weight or accept the
default weight. If no changes are made
within 3 minutes, the appliance switches to
standby mode.
Touch sensor fields to change weight.
Touch to accept weight shown on the dis-
play. END TIME is shown on the display in
box 2, calculated based on accepted weight.
The programme is started.
1 2