AMICA 1143.4TfYDX EN - Manual (Page 33)

33
CLEANING AND MAINTENANCE
Dismantling shelf supports
Dismounting the side racks
Ovens marked with the letter D are equipped
with easily removable wire shelf supports. To
remove them for washing, pull the catch on
the front (Z1), then swing the support and
remove from the rear catch (Z2). After clean-
ing the shelf supports, place them in support
holes in the oven and press in the catches
(Z1 and Z2).
Z2
Z1
Ovens marked with the letters Db have stain-
less steel sliding telescopic shelf supports
attached to the wire shelf supports. The
telescopic shelf supports should be removed
and cleaned with the wire shelf supports.
Before you put the baking tray on them, they
should be pulled out (if the oven is hot, pull
out the telescopic shelf supports by hooking
the rear edge of the baking tray at the front of
the telescopic shelf supports) and then slide
along with the tray.
Removing telescopic shelf supports
Installing telescopic shelf supports
Important!
Do not wash telescopic shelf supports
in a dishwasher.