AMICA ZIA 448 - Manual (Page 23)

22 GB
1041
1037
Unsealed closing of the salt box cover*
Salt may cause oxidation on metal surfaces. Use the supplied salt funnel  
while filling in softening salt. Make sure that the salt box cover is tightly
closed after finishing the filling process. Run a washing program to clean up
the salts spilled in the machine. Recheck the salt box cover after the program
is completed.
Grounding line
Check if your dishwasher is connected to the actual grounding line.  
Otherwise, the static electric created in the dishwasher may remove the
protective coating on metal surfaces and cause blackening and corruption.
Rusts, Blackening And Corruption Of Surface
Scratch / Break In Glassware
Kitchenware containing Aluminum
Kitchenware that contains aluminum should not be washed in dishwashers.  
Salt leakage*
Use the supplied salt funnel while filling in softening salt. Make sure that  
the salt box cover is tightly closed after finishing the filling process. Run a
washing program to clean up the salts spilled in the machine. Recheck the
salt box cover after the program is completed.
Low water softening setting, inadequate salt*
In products equipped with water softening setting, water softening should be  
properly set in accordance with the hardness of the supply water. Add salt
into the salt container, if necessary.
Detergent kept under unsuitable conditions
If you are using powder detergents, do not store them in humid places after  
you open their boxes. Keep them in a closed container, if possible. For ease-
of-storing, we recommend you to use tablet detergents.
Overloading the baskets
In order to avoid scratches and breaks in glasses and other glass tableware  
because of collision with each other during washing process arising from their
placement, do not overload the baskets in excess of their capacity.