AMICA ZIA 448 - Manual (Page 7)

6 GB
3 Directions for Assembly
Safety notes for installation
Prior to installing and using your
appliance, please check it for possible
transit damage.
If the appliance is damaged, please
contact your supplier.
Never install or use a damaged
appliance.
The following directions must be
followed to connect the dishwasher
properly.
Before operating your dishwasher,
please ensure that the information
on the type plate corresponds to the
current and voltage of your power
supply.
The appliance may only be
connected using a properly grounded
socket. Ensure that the appliance is
grounded according to regulations.
The grounded socket must be easily
accessible and close to the appliance.
Do not use extension cables or
multiple adapters, as this can lead
to overheating, which can be a fire
hazard.
Hardwiring may only be carried out
by a qualified electrician.
Check the power cable, the water
inlet hose and the drainage hose.
Damaged parts may only be replaced
by customer service personnel or by a
qualified electrical service expert.
Installing Your Dishwasher
Choose a suitable location for your
•
dishwasher. Take care to ensure
that the appliance is stable on a
level surface.
Unevenness in the floor can be
•
equalised by adjusting the screw
feet. When the appliance is
standing correctly, the door can be
closed without difficulty.
Water inlet and drainage hoses
•
must be positioned so that they
can move freely without bending
or squeezing.
The appliance may not be installed
•
in a room where the temperature
is below 0° Celsius.