ConnectPRO Master-IT StreamLine Console User Guide - Manual (Page 6)

StreamLine Console
5
5. Remove both of the rear brackets. Now, the front
brackets hold the assembled drawer.
6. Attach the aluminum extensions (from the Rear bracket & extension kit) to both sides of the KVM module
box. Please note the length of the aluminum extensions and mount them in one of the following ways.
Short aluminum extensions attachment Long aluminum extensions attachment
7. The rear brackets, aluminum extensions and slide rails have tight fit. Make sure you follow these steps for
easy installation. A. Slide the rear brackets onto the aluminum extensions. B. Then, insert both sliding
rails of the assembled drawer into the tight space formed by the rear brackets and the aluminum extensions.
The KVM module should be pushed in evenly on both right and left sides.