MagTek Audio Reader for Android Devices - Manual (Page 13)

7
For an AAMVA card, the specified mask character is substituted for each of the characters read
from the card.
getMagnePrint
Supported on uDynamo only. This 128 byte Binary field contains the MagnePrint data. Only
the number of bytes specified in the MagnePrint data length field are valid. The least significant
bit of the first byte of data in this field corresponds to the first bit of MagnePrint data. If the
Enable/Disable MagnePrint property is set to disable MagnePrint, this field will not be sent.
-
public String getMagnePrint()
Parameters
Return Value
Empty String
getMagnePrintStatus
Supported on uDynamo only
-
public String getMagnePrintStatus()
Parameters
Return Value
Empty String
This Binary field represents 32 bits of MagnePrint status information. Each character represents
4 bits (hexadecimal notation). For example, suppose the characters are: “A1050000”:
Nibble 1 2 3 4 5 6 7 8
Value A 1 0 5 0 0 0 0
Bit 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
Value 1 0 1 0 0 0 0 1 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Usage* R R R R R R R M R R R R R R R R 0 0 D 0 F L N S 0 0 0 0 0 0 0 0
* Usage Legend:
• D = Direction
• F = Too Fast
• L = Too Slow
• M = MagnePrint capable
• N = Too Noisy
• R = Revision