Listenforevents, Sendcommandtodevice, Getsdkversion – MagTek Audio Reader for Android Devices User Manual
Page 25
19
track data length value for the track that has the error will be set to zero and no valid track data
will be supplied.
-
public String getTrackDecodeStatus()
Parameters
Return Value
Track Decode Status. Consists of three 2-byte hex values representing the decode status
for tracks 1, 2, and 3 (respectively from left to right).
Values are:
00 = Track OK
01 = Track read Error
02 = Track is Blank
listenForEvents
Sets which events to listen for
-
public void listenForEvents(long lpEvents)
Parameters
lpEvents
event type to listen for:
MagTekSCRA.DEVICE_EVENT_DATA_CHANGE
MagTekSCRA.DEVICE_EVENT_DATA_ERROR
MagTekSCRA.DEVICE_EVENT_DATA_START
sendCommandToDevice
Sends command to device
-
public void sendCommandToDevice(String lpstrMessage, int iTimeout)
Parameters
lpstrMessage
message to send
iTimeout
timeout wait time
getSDKVersion
Retrieves SDK version
-
public String getSDKVersion()
Parameters
Return Value