Close the door and press the button, Time remaining, To add or remove laundry after the program starts – ASKO W6903 User Manual

Page 22: Stopping or changing a program, Once the program has finished, Close the door and press the, Operating instructions

Advertising
background image

6

Close the door and press the
Start/Stop button

Time remaining

The time remaining is shown in hours and
minutes. Once a program has been selected,
an estimated running time for the complete
program is displayed. This may differ from
time to time depending on the temperature of
the water entering the machine and the size
of the load. During the actual program the
time counts down in minutes. If the program
time is longer than a previous wash with the
same program, "1" will be displayed until the
program has finished.

To add or remove laundry after the
program starts

If you want to add or remove items after the
program has started, you can stop the pro-
gram by pressing and holding the Door
Opening button (key symbol) for three sec-
onds. "Door" appears on the display. When
you restart the machine, add any extra deter-
gent needed and close the door. The machine
continues automatically from the point where
the program was interrupted.

Stopping or changing a program

You can also stop a program by pressing the
Start/Stop button for three seconds. "Stop"
appears on the display. To restart the ma-
chine, select a new program, add any extra
detergent needed, and press the Start/Stop
button.

7

Once the program has finished

Once a program has finished, "End"
appears on the display.

The door opens automatically once the pro-
gram has finished. If you want to deactivate
Automatic Door Opening, see the "Selecting
settings" section.

• Remove the laundry.
• Turn off the main power switch and

you will save energy.

If you have small children or pets at home,
close the washer door once you have re-
moved the laundry.

Customer Care Center

22

1-800-898-1879

www.askousa.com

Operating instructions

Advertising