Asante Technologies AWRT-300N - Manual (Page 12)

5. Connecting to the Router Wirelessly
Below are the default wireless settings of the router. You must configure your wireless
network card to the same settings in order to establish a wireless connection to the
router. Please refer to your wireless network card’s manual on how to configure these
settings.
SSID: default
Network Mode: BGN-Mixed
Authentication: Open System
Channel #: 6
WEP: disabled
If you want to change the router’s wireless and security settings, log in to the router and
select the Wireless tab. Click on Manual button. Click Save Settings to save the settings after you
make changes.
12