Asante Technologies AWRT-300N - Manual (Page 32)

6.2.4 Wireless > Advanced Wireless Settings
You can configure various advanced wireless settings on this screen.
AP Isolation: This isolates all wireless clients and wireless devices on your network
from each other. Wireless devices will be able to communicate with the Router but not
with each other. To use this function, select Enabled.
Frame Burst: Frame Burst allows packet bursting which will increase overall network
speed.
Authentication Type: The default is set to Auto, which allows either Open System or
Shared Key authentication to be used. With Open System authentication, the sender
and the recipient do NOT use a WEP key for authentication. With Shared Key
authentication, the sender and recipient use a WEP key for authentication.
32