Accton Technology SIP Gateway VG3300 Series - Manual (Page 31)

If the status shows “REGISTERED” means successful, otherwise means fail; please notice that.
When you find the registration is fail, first check the “Registrar Setting” configuration is normal, or
not “Enable”.
Then check the “Public Address” and “Outbound Authentication” configuration is in normal status.
If the configurations are all right, please check the situation with your SIP service provider.
10.7. Phone Book
10.7.1. General Phone Book
Since the SIP phone number is not easy for regular phone to dial, VG3300 provide a SIP phone
book to let standard phone to make a SIP call easier. The phone book uses index number to map
SIP account. User also can configure this index number to build the route by SIP Proxy or build the
route without Proxy if destination gateway use fixed IP (Public IP or private IP in VPN)
For instance if the phone book is configure as below:
Index Public Address Port Via Proxy
100 [email protected] 5060 No <-- GW1
200 [email protected] 5060 Yes <-- GW2
201 [email protected] 5060 No <-- GW2
Notice: If your SIP account is digit type like [email protected] or [email protected], you don’t
need to configure the items.
Configuration
WEB page: PHONEBOOK \
10.7.2. Hotline Function
A new Hotline function is added for VG3300 Firmware Version 1.07 or above
When hotline function is enabled, the FXS channel is connected to specified SIP device or
VES3302 (if the VG3300 is configured and register to VES3302 as a client) automatically when user
of VG3300 FXS channel picks up hand-set.
♦ If the FXS channel is Hotlined to other SIP device (SIP Phone, Softphone), other SIP device
28