t&mSystems Project PageMic8 - Manual (Page 5)

2.DESCRIPTION
1.The PageMic8 remote zone paging microphone work together with 8 ZONE PAGING MIC through
universal industrial standard CAT5 cable for zone announcement or communication at a remote
and different location from the control center.
2.Each matrix controller 8 ZONE PAGING MIC provides two RJ45 ports for the remote paging
microphone. Maximum each system could support two remote zone paging microphone link
together with the master 8 zone matrix controller. Extension control keypad shall be used when
system zone number is lager than 8.
3.The CAT 5 wiring is not only featured of cost-effective, convenient layout, but also integration of
RS 485 communication and audio transmission together.
4.Extra DC 24V power supply is needed to power the remote one paging microphone, a power
adaptor is included together within the microphone packaging.
5.Eight zone selector with state indication.
6.Talk and all zone paging swift keys are provided.
7.2 and 4 tones chimes with selector and off switch.
8.Volume controls are provided for chime and microphone.
9.Full indications includes individual zone, all zone, busy, paging, power, output level to provide a
direct visualization.
10.Extension control keypad PageMic8E is needed when the system zone is more than 8, a
complete connection accessories are provided to ensure a convenient installation. Each extension
control keypad zone capacity is eight.
5