Т³гж 8, Front and rear panel, Rear panel – t&mSystems Project PageMic8 User Manual
Page 8
0
10
MIC VOL.
0
10
CHIME VOL.
ON
OFF
COM
CHIME
POWER
24VDC
4 TONE
2 TONE
OFF
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO
:
4. FRONT AND REAR PANEL
11.POWER SWITCH. The paging console is powered from the matrix through CAT5 cable.Power on
when power switch is placed at on position, and power off when power switch is placed at off
position.
12.DC 24V POWER INPUT. The DC24V extra power supply is needed for the paging console.
13.COMMUNICATION PORT, the communication port is designed by RJ45 port, it is used to
communicated with the matrix.
14.MIC VOLUME CONTROL It is used to adjust the microphone output volume, clockwise
adjustment to increase the level.
15.CHIME VOLUME CONTROL It is used to adjust the chime volume, clockwise adjustment to
increase the level.
16.CHIME SELECTOR. The selector is designed of three options, 2 tone, off and 4 tones, this
chime is used to ask listeners' attention before announcement
REAR PANEL
11
12
13
14
15
16
8