Kinivo BTH220 Bluetooth Stereo Headphone EN - Manual (Page 6)

Kinivo BTH220 Bluetooth Stereo Headset 6
3. Standby Mode/Idle Feature
When the headphones are powered on and are inactive after several minutes
of use, they will automatically enter standby mode. In this state, the BTH220 will
preserve battery power. To wake the device, simple play audio with the device it
is connected to or press any button on the BTH220.
4. Bluetooth Pairing
a. Ensure the headphones are powered off, then enter the pairing mode on
the headphones by pressing and holding the multifunction button for 7 to
10 seconds until the blue and red lights start flashing alternatively (Note -
do not release when you see only the blue light)
b. Follow the operating instruction of your Bluetooth device to start the
pairing process.
For iPad, iPhone, iPod Touch
Navigate to Settings > General > Bluetooth (On), then select the BTH220 to pair
the headphones.
For Android smartphones
Navigate to Settings > Wireless & networks > Bluetooth settings while
Bluetooth is enabled, then select Scan for devices. Select the BTH220 to pair
the headphones.
5. To Pair with Windows 7 or Windows 8
a. Make sure your computer is Bluetooth enabled and supports Bluetooth
stereo (A2DP).