Т³гж 15, Using the battery pack – Avayon DXP-10P II User Manual
Page 15
O
PE
N
O
PE
N
~ 13 ~
Using the Battery Pack
Installing the battery pack
<1>.Align and insert the battery
pack into the corresponding
slots on the back of the unit.
<2>.Slide the battery pack to the
left
until it clicks into place.
Removing the battery pack
<1>.Slide down the latch.
<2>.Slide the battery pack to the
right, and remove.
OPEN
LED INDICATOR
Charging the battery pack
1.Attach the battery pack to the Player.
2.Use the AC adapter to charge the battery pack. Make the connection as illustrated below.
3.Slide POWER to OFF. ( The Player must be turned off to charge the battery).
During charging, the red and green LEDs blink alternatively.
When the battery is fully charged, the orange LED stays lit .
When the Player uses battery for power, steady red LED lights.
If the battery power is low, the red LED blinks.
LED Indicator
To home power outlet
To DC12V IN on the DVD player