Avayon DXP-10P II - Manual (Page 26)

~ 24 ~
Setting Audio for Downmix
1. Press SETUP on the remote control.
2. Use the direction keys ( ) to select Audio Setup and
its sub-menu.
3. Press to confirm your selection.
4. Press SETUP to exit.
Changing Digital Out
:Select
OSD
Audio Setup
SPDIF/PCM
SPDIF/RAW
Off
Changing Downmix
Note:
SPDIF/OFF:select this when you do not want to have digital
audio signal output.
SPDIF/RAW:select this when the digital audio output is
connected to an external amplifier with Dolby
Digital or DTS decoder which gives 5.1 channel
sound.
SPDIF/PCM:select this when the external amplifier has no
decoder.
Digital Out
Downmix
:Select
OSD
Audio Setup
Lo/Ro
Lt/Rt Digital Out
Downmix