Chatsworth Products Electronic Lock Kits System1500 - Manual (Page 2)

Electronic Lock Kit System 1500
Page 2 of 3
Installation Instructions
PROGRAMMING
Every program command must begin by pressing the (#) button, followed by the
Master Code, Sub-Master Code or User Code.
MASTER AND SUB-MASTER CODE COMMANDS
SET OR CHANGE THE USER CODE (4-digits)
(#) (Master or Sub-Master Code) ● (03) ● (User Code ID) ● (User Code) ●●
Example: #11223344●03●02●1455●●
Result: The second User Code is 1455.
Note: System 1500 can support 20 User Codes. You must assign a unique
User Code ID (1-20) for each User Code.
SUSPEND INDIVIDUAL USER CODE
(#) (Master or Sub-Master Code) ● (04) ● (User Code ID) ●●
Example: #11223344●04●01●●
Result: The User ID number 01 is valid but suspended. The User Code
assigned to User ID number 01 will not unlock the cabinet. The Red and Blue
LEDs will flash together after the code is entered.
RESTORE INDIVIDUAL USER CODE
(#) (Master or Sub-Master Code) ● (05) ● (User Code ID) ●●
Example: #11223344●05●01●●
Result: The User ID number 01 is restored. The User Code assigned to User
ID number 01 will now be able to unlock the cabinet.
SUSPEND ALL USER CODES
(#) (Master or Sub-Master Code) ● (06) ●●
Example: #11223344●06●●
Result: All User Codes suspended. When a valid code is entered, the lock will
remain locked, but the Red and Blue LEDs will flash together.
MASTER AND SUB-MASTER CODE COMMANDS (continued)
RESTORE ALL USER CODES
(#) (Master or Sub-Master Code) ● (07) ●●
Example: #11223344●07●●
Result: All User Codes are restored.
SET OR CHANGE THE SUB-MASTER CODE (8-digits)
(#) (Master or Sub-Master Code) ● (08) ● (New Sub-Master Code) ●
(New Sub-Master Code) ●●
Example: #11223344●08●55667788●55667788●●
Result: The new Sub-Master Code is 55667788.
DISABLE/ENABLE AUDIBLE KEYPAD
(#) (Master or Sub-Master Code) ● (18) ● (18) ●●
Example: #11223344●18●18●●
Result: The default setting is Enabled so there is a sound each time a keypad
button is pressed. This command disables or enables the audible keypad.
USER CODE COMMANDS
CHANGE THE USER CODE (4-digits)
(#) (User Code) ● (New User Code) ●●
Example: #1234●2222●●
Result: The User Code is changed from 1234 to 2222.
Note: The symbol ● indicates the blue LED flashing once.