Chatsworth Products Electronic Lock Kits System1500 - Manual (Page 3)

Electronic Lock Kit System 1500
Page 3 of 3
Installation Instructions
The following commands require the Master Code.
MASTER CODE COMMANDS
CHANGE THE MASTER CODE (8-digits)
(#) (Master Code) ● (01) ● (New Master Code) ● (New Master Code) ●●
Example: #11223344●01●22334455●22334455●●
Result: The Master Code is changed from the default 11223344 to 22334455.
DELETE THE SUB-MASTER CODE
(#) (Master Code) ● (09) ● (09) ●●
Example: #11223344●09●09●●
Result: The Sub-Master Code is deleted.
SET DUAL CODE MODE
(#) (Master Code) ● (12) ● (12) ●●
Example: #11223344●12●12●●
Result: Two valid codes are now required to open the lock. Enter two User
Codes or a User Code and a Sub-Master Code to open the lock. The Master
Code will also open the lock.
CANCEL DUAL CODE MODE
(#) (Master Code) ● (13) ● (13) ●●
Example: #11223344●13●13●●
Result: Lock reverts to standard mode where only one code is required to
open the lock.
Note: The symbol ● indicates the blue LED flashing once.