Chatsworth Products LCD Monitors - Manual (Page 16)

16
LCD KVM Drawer – Server Connections
Connect the LCD KVM Drawer to an individual server with USB or PS/2 keyboard and mouse
connections using the included Combo KVM Cable.
Connection to Server with USB keyboard and mouse:
Connection to Server with PS/2 keyboard and mouse:
Notes:
• The connections shown above are only for the LCD KVM Drawer without built-in KVM Switch.
•
For the LCD KVM Drawer with built-in KVM Switch, please refer to pages 16 and 17.
Caution: The LCD KVM Drawer is hot-pluggable, but components of connected
devices, such as the servers and KVM Switch, may not be hot-pluggable. Plugging
and unplugging cables while servers and the KVM Switch are powered on may cause
irreversible damage to the servers, KVM Switch and LCD KVM Drawer. Before
attempting to connect anything to the LCD KVM Drawer, we suggest turning off the
power to all devices before connecting them. Apply power to connected devices again
only after the LCD KVM Drawer is receiving power. CPI is not responsible for damage
caused by hot plugging devices.