Campbell Scientific CM106B Tripod - Manual (Page 16)

CM106B Tripod
6.1.2 Mast
The CM106B includes a mast extension that can be fully extended for a 3 m
(10 ft) height, or partially extended for a 2.1 m (7 ft) height. Remove the bolts
in the extension, align the holes in the insert with holes in the mast, and install
the four bolts previously removed. Two additional holes make it possible for
the extension to extend 8 in. or 12 in., or 20 in., 24 in., or 28 in. above the mast
depending on which end is inserted in the mast.
FIGURE 6-3. Tripod mast and insert
Mast extension
fully extended
Mast
Mast extension
retracted
8