Campbell Scientific CM106B Tripod - Manual (Page 9)

CM106B Tripod
1. Introduction
The CM106B is a general purpose tripod that can be used for mounting
sensors, solar panels, antennas, and instrument enclosures. FIGURE 1-1 shows
the CM106B being used in a typical weather station configuration.
FIGURE 1-1. Typical tripod-based weather station
2. Cautionary Statements
• READ AND UNDERSTAND the Precautions section at the front of this
manual.
• WARNING — Ensure structural integrity during setup and weather
extremes to minimize the chance of damaging the tripod or instruments.
Read all instructions carefully. Once the tripod is in full vertical position,
securely fasten it to the ground using ground spikes.
1