Campbell Scientific Raven100 CDMA Cellular Modem - Manual (Page 7)

Raven100 CDMA AirLink Cellular Modem
4.2 Datalogger Site Equipment
• Raven modem with power cable (included with modem).
• Datalogger—21X, CR510, CR10(X), CR23X, CR7, CR1000, CR5000,
CR3000, CR800.
• SC105 or SC932A Interface—connects the modem to the 21X, CR510,
CR10(X), CR7, or other dataloggers’ CS I/O port.
If you have a black SC12 cable that is not Rev 1 or newer (as
indicated on cable), it is a CS I/O cable only and will not work
for RS-232. Connect the black SC12 cable between the
datalogger and the SC932A. Use a 9-pin serial cable or a blue
ribbon cable between the phone and the SC932A. NOTE
• PN 18663 Null Modem Cable—connects the modem to the CR23X,
CR3000, CR800, CR2XX, CR1000 or CR5000 RS-232 port.
SC105 interface connects the modem to a datalogger’s CS I/O port;
recommended for dataloggers with the Pakbus Operating System.
SC932A interface connects the modem to the CS I/O port;
recommended for dataloggers with the Mixed-Array Operating System.
3