Pro-Lite BL3225RB - Manual (Page 8)

NEW CONTENT
CREATE A SINGLE-LINE MESSAGE
Enter the Edit Mode
1) Press the [MENU] button.
2) The Add Contents option appears. Press [OK].
3) The Add Message option appears. Press [OK].
NOTE
:
When a momentary prompt appears, simply wait until it disappears
from the display before proceeding to press a button. If a button is
pressed during a prompt, simply press the designated button again.
4) When you see the flashing cursor to the left, you are ready to proceed.
Input the word “HELLO WORLD”
5) Press [3 GHI]. The letter “G” appears.
6) Press [3 GHI] again. The letter “H” appears.
NOTE
:
Each Character/Number button supports multiple letters.
7) Now press [2 DEF] twice. The letter “E” appears.
8) Press [4 JKL] three times. The letter “L” appears.
TIP
:
Correct mistakes easily by using the [DELETE] button.
9) Now press the arrow button to advance the cursor.
NOTE
:
If necessary to use the same Character/Number button to display an
additional letter, simply press the arrow button to advance the cursor
to the right, than press the designated Character/Number button again.
10) Press [4 JKL] three times again. The letter “L” appears.
11) Press [5 MNO] three times. The letter “O” appears.
12) Press [SPACE] and continue to input the word “WORLD”.
TIP
:
The [FIX] button resizes the word to fit the entire display. Go ahead, try it!
Exit the Edit Mode
13) Press [OK].
14) The Automatic Effect option appears. Press [OK].
15) You are now returned to the Add Contents option.
Run your message
16) Finally press [ESC] to run your message.
[ ]
[ ]
Page 4