Pro-Lite BL3225RB - Manual (Page 9)

NEW CONTENT
(continued)
CREATE A DOUBLE-LINE MESSAGE
Enter the Edit Mode
1) Press the [MENU] button.
2) Press [OK].
3) Press the arrow button once. The Add Dual Message option appears.
4) Press [OK].
5) When you see the flashing cursor to the left, you are ready to proceed.
Input the word “THANK YOU”
6) First let’s input the word “THANK”.
7) Press [7 STU] twice. The letter “T” appears.
8) Press [3 GHI] twice. The letter “H” appears.
9) Press [1 ABC]. The letter “A” appears.
10) Press [5 MNO] twice. The letter “N” appears.
11) Press [4 JKL] twice. The letter “K” appears
12) Now press the arrow button once to place the cursor on the second line below.
13) Continue to input the word “YOU”.
Exit the Edit Mode
14) Press [OK].
15) The Automatic Effect option appears. Press [OK].
16) You are now returned to the Add Contents option.
Run your message
17) Press [ESC] to run your message.
PRACTICE
17) Go ahead! Try adding a couple more Single-Line and Double-Line messages.
NOTE
:
All new messages created will run in succession.
[ ]
[ ]
Page 5