Connect and disconnect the ac adapter, Power cord requirements, General requirements – Samsung NP-R528CE Uživatelská příručka

Stránka 22

Advertising
background image

1-22

Connect and Disconnect

the AC adapter

The socket-outlet shall be installed near the

equipment and shall be easily accessible.
Do not unplug the power cord out by pulling

the cable only.

Power Cord Requirements

The power cord set (wall plug, cable and AC

adapter plug) you received with your computer

meets the requirements for use in the country

where you purchased your equipment.
Power cord sets for use in other countries must

meet the requirements of the country where

you use the computer. For more information

on power cord set requirements, contact your

authorized dealer, reseller, or service provider.

General Requirements

The requirements listed below are applicable

to all countries:

All power cord sets must be approved by an

acceptable accredited agency responsible

for evaluation in the country where the

power cord set will be used.

The power cord set must have a minimum

current capacity of 7 A and a nominal

voltage rating of 125 or 250 volts AC, as

required by each country’s power system.

(USA ONLY)

The appliance coupler must meet the

mechanical configuration of an EN 60

320/IEC 320 Standard Sheet C7(or C5)

connector, for mating with appliance inlet on

the computer.

Advertising
Tato příručka se vztahuje na následující produkty: