Setting a boot password – Samsung NP-R528CE Uživatelská příručka

Stránka 48

Advertising
background image

1-48

Setting a Supervisor Password

A Supervisor Password is required to turn the

computer on or to start the System Setup.
When setting a Supervisor Password, users

other than a supervisor cannot use the

computer.

1

Select the Security menu in the BIOS

Setup.

2

In the Set Supervisor Password item,

press <Enter>.

3

Enter a password, press <Enter>, re-

enter the password for confirmation,

and press <Enter> again. The

password can be up to 8 alphanumeric

characters. Special characters are not

allowed.

4

The supervisor password has been set.

The supervisor password is required to

turn the computer on or to enter the

BIOS Setup.

For some models, if the password

entered message appears in the

Setup Notice window, the settings

are not complete until the

Enter key

is pressed.

Setting a User Password

Users can start the system with a user

password, but cannot enter the System Setup.

By doing this, you can prevent other users from

entering Setup.

Setting a Boot Password

When setting a password, you have to enter a password to use the computer or enter the BIOS

Setup.
By configuring a password, you can restrict system access to authorized users only and protect

data and files saved on the computer.

Before You Start!

Do not lose or forget your password.
If you have forgotten your password, contact a Samsung service center. In this case, a

service fee will be charged.

XXXXXXXX

Advertising
Tato příručka se vztahuje na následující produkty: