Reversing the door swing, Problems and solutions – Samsung RL41WCSW User Manual

Page 18

Advertising
background image

18

REVERSING THE DOOR SWING

• Check that the power plug is correctly connected.

• Is the temperature control on the front panel correctly set?

• Does sun shine on the appliance or are there heat sources nearby?

• Is the back of the appliance too near to the wall?

The appliance is not operating at all or the temperature is too high

• Is the temperature control on the front panel set to the coldest temperature?

• Is the surrounding temperature too low?

• Did you put the hot food in the refrigerator?

The food in the refrigerator is frozen

• Check that the appliance is installed on a stable, level floor.

• Is the back of the appliance too near to the wall?

• Have any foreign objects fallen behind or under the appliance?

• Is there noise coming from the compressor in the appliance?

• A ticking sound may be heard inside the appliance; this is normal. This sound occurs when the

various accessories contract or expand.

• Heat-proof pipes are installed in the front corners of the appliance to prevent condensation from forming.

When the surrounding temperature rises, this may not always be effective. However, this is not abnormal.

• In very humid weather, condensation may form on the outer surface of the appliance when the

moisture in the air comes into contact with the cool surface of the appliance.

The front corners and sides of the appliance are warm and condensation starts to form

PROBLEMS AND SOLUTIONS

There are unusual noises

29. Detach the Fridge and Freezer gaskets and attach them

after rotating 180˚. (Make sure the door gaskets are

properly arranged. If not, there can be a noise or dew

can be formed which affects perfomance of the unit.)

26. Switch the position of the

CAP HOLE HINGE UPP.

30. Make sure the doors are working

properly.

27. Reconnect the electric wires and

reposition the wires inside of the

CAP CABI as shown below.

28. Reassemble the CAP

CABI after assuring the

position of Wires.

CAP HOLE HINGE

DA99-01220J.indb 18

2010.6.23 10:44:39 AM

Advertising
This manual is related to the following products: